R190 GEN:2

Compact Loaders

R190 GEN:2

Key Features

  • All-Tach® Attachment System (Universal Type)
  • Hydraloc™ System
  • ROPS/FOPS Level II
  • Dual T-Bar or Joystick Control System
  • Zero Maintenance Axles w/8-Bolt Rims
  • Acoustical Sound Material and Deluxe Headliner
  • Standard High Back Cushion Seat

Key Specifications

  • Operating capacity (50%) - 862 kg (1,900 lbs.)
  • Overall height to top of ROPS - 1956 mm (77")
  • Gross Power - 69.3 hp (51.67 kW) @ 1625 rpm
  • Yanmar / 4TNV98C-NMS2V / Tier IV
  • 241 Nm (178 ft.-lbs.) @ 1625 rpm max torque
  • 3022 mm (119") height to hinge pin
  • 1575 mm (62") machine width - less bucket
  • 3173 kg (6,995 lbs.) operating weight
gehl.com
R190 GEN:2 Compact Loaders
Metric Imperial
Capacities Operating Capacity At 50% Tipping Load 861.82 kg 1900 lb
Operating Weight 3172.87 kg 6995 lb
Unladen weight 2953 kg 6510 lb
Tipping capacity 1723.65 kg 3800 lb
Weight and dimensions Wheelbase 1066.80 mm 42 in
Overall Operating Height - Fully Raised 3993 mm 157 in
Height to Hinge Pin - Fully Raised 3022.60 mm 119 in
Overall Height to top of ROPS 1955.80 mm 77 in
Dump angle at full height 39 °
Dump height 2313 mm 91 in
Overall length with bucket 3261 mm 128 in
Dump reach - Full height 667 mm 26 in
Rollback at ground 28 °
Rollback Angle at Full Height 99 °
Seat to ground height 904.24 mm 36 in
Overall width less bucket 1574.80 mm 62 in
Bucket Width 1676.40 mm 66 in
Ground clearance 160.02 mm 6 in
Overall length - Less Bucket 2446.02 mm 96 in
Clearance Radius - Front with Bucket 2032 mm 80 in
Rear departure angle 21 °
Performances Travel speed (unladen) 12.55 km/h 8 mph
Travel Speed with Two-Speed Option - Maximum 19.47 km/h 12 mph
Wheels Standard tires 10 x 16.5
Engine Engine brand Yanmar
Engine model 4TNV98C-NMS2V
Engine norm Stage IIIA
Max. torque / Engine rotation 241 Nm / 1625 rpm 178 ft/lbs / 1625 rpm
Power source Diesel
Engine power (Hp / kW) 71 Hp / 51.68 kW
Battery voltage 12 V
Starter 3 kW
Hydraulics Standard flow - Auxiliary hydraulics 70.78 l/min 19 US gpm
Auxiliary Hydraulic Pressure 207 bar 3002 PSI
High-Flow Auxiliary Hydraulics - Option 113.94 l/min 30 US gpm
High-Flow Auxiliary Hydraulics Pressure - Option 200 bar 2901 PSI
Tank capacities Fuel 58.67 l 16 US gal
Hydraulic tank capacity 35.96 l 9 US gal
Noise and vibration Noise to environment (LwA) 100 dB
Whole-Body Vibration (ISO 2631-1) 0.96 m/s² 3 ft/s²
Vibration on hands/arms 1.53 m/s² 5 ft/s²

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

R190 GEN:2

Standard Features

  • Lift Arm Support Device
  • 12Volt Power Port
  • Anti-Vandalism Lock Provisions
  • Front and Rear - Work Lights
  • Operator Restraint Bar
  • ROPS/FOPS Level II Overhead Guard
  • Hydrostatic Drive - Servo
  • Fuel gauge with low level indicator
  • Hydraloc™ Safety System
  • Adjustable 2-inch Seat Belt
  • All-Tach® Attachment Mounting System
  • Pilot Joystick Controls
  • Horn

Optional Features

  • Inner rear view mirror
  • Simplified lifting system without spreader bar
  • Swing-out Cab Door
  • Bluetooth car radio
  • Engine Block Heater
  • LED Work Lights
  • Rearview Camera
  • Ceiling light
  • Selectable Self-Leveling Hydraulic Lift Action 4
  • Sliding Side Windows
  • Suspension Seat
  • 3-inch Seatbelt
  • Battery Disconnect
  • Hydraglide™ Ride Control
  • Heat & Defrost
  • Rotating Beacon
  • Back-Up Alarm

One Gehl Way, West Bend, WI 53095
Phone: (262) 334-9461

Gehl Compact Equipment

© Manitou Americas, Inc. GEHL. All rights reserved. A Manitou Group Brand

Created on December 16, 2025 at 5:34 AM UTC