AL750

Articulated loaders

Key Features

4-Post Canopy ROPS and FOPS Certified
Proportional Auxiliary Hydraulics with Case Drain and Circuit Pressure Dump
Inching Pedal
Digital Display with Audible and Visual Indicators
Differential Lock (Hydraulically Activated Front and Rear)
Power-A-Tach® Attachment Mounting System (4-Point, Skid Steer and EuroStyle)
Lift Arm with Z-Bar Kinematics, Limited Self-Level and Mechanical Return to Dig
Lift Arm Detent
Hydraglide™ Ride Control*
High-Flow Auxiliary Hydraulics*

*Optional Features

Key Specifications

7,446 lbs (3378 kg) Static Tipping Load with Bucket Straight
74.4 hp (55.4 kW) gross power @ 2300 rpm
8' 2" (2.48 m) height to top of ROPS
10' 9" (3.28 m) maximum lifting height (below forks)
11' 2" (3.4 m) outer turning radius

gehl.com

AL750 Articulated loaders

		Metric
Capacities	Static tipping load with bucket (straight)	3587 kg
	Static tipping load with bucket (full turn)	2621 kg
	Max. height of bucket pivot point	3.47 m
	Max. lifting height (below forks)	3.28 m
	Breakout force with bucket	5906 daN
	Static tipping load with pallet forks - Straight with cab	2882 kg
Weight and dimensions	Unladen weight (with forks) with 4-post canopy	4781 kg
	Wheelbase	2.06 m
	Overall width of 4 posts canopy	1.45 m
	Overall cab width	1.45 m
	Overall height with 4 posts canopy	2.48 m
	Overall height with cab	2.48 m
	Tilt-up angle	45 °
	Tilt-down angle	45 °
	Articulation angle	45 °
	Overall width less bucket	1.74 m
	Overall length - Less Bucket	4.44 m
	Ground clearance	0.31 m
Engine	Engine brand	Deutz
	Engine model	TD3.6 L4
	Engine norm	Stage IIIB
	Number of cylinders / Capacity of cylinders	4 - 3600 cm³
	Engine power (Hp / kW)	74.30 Hp / 55 kW
	Max. torque / Engine rotation	330 Nm / 2300 rpm
	Engine cooling system	2 radiators water + hydraulic oil
Transmission	Transmission type	Hydrostatic
	Number of gears (forward / reverse)	2 / 2
	Max. travel speed (may vary according to applicable regulations)	30 km/h
	Travel speed (laden)	30 km/h
	Differential lock	Front and rear locking of the machine
	Parking brake	Manual
Hydraulics	Hydraulic pump type	Gear pump
	Hydraulic flow - Pressure	69.50 l/min / 200 bar
	High-Flow Option (l/min)	114.30 l/min
	Drive hydraulic system pressure	380 bar
Tank capacities	Hydraulic oil	73.80 l
Tank capacities	Fuel	102 l
Noise and vibration	Vibration on hands/arms	< 2.50 m/s²
Miscellaneous	Cab certification	ROPS - FOPS cab (level 1)

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

Standard Features

Z-Bar Loader Linkage w/ Limited Self-Leveling
Side View Mirrors
12Volt Power Port
Oscillating Front Frame
Removable Rubber Floormat
Tilt & Lift Arm Float Detent with Detent Disable
Adjustable and telescopic steering column
Adjustable arm rests
Cup Holder
Reverse and Brake Tail Lights
Electronic Hand Throttle
Seven Way Adjustable Air Suspension Seat
Differential Lock
Power-A-Tach® Attachment Mounting System
Lift Tilt Electronic Lockout Switch
Canopy
Articulation Locking Bar
LED work lights - On the top of the boom (fixed part) (x2)
Two-Speed Hydrostatic Drive System
Proportional Auxiliary Hydraulics w/ Case Drain & Circuit Pressure Dump
Master electrical disconnect switch
Horn
Multi-Function Display Screen

Optional Features

License Plate Holder
3-inch Seatbelt
Hydraglide™ Ride Control
LED Work Lights
High-Flow Auxiliary Hydraulics
Engine Block Heater
Back-Up Alarm

One Gehl Way, West Bend, WI 53095
Phone: (262) 334-9461

Gehl Compact Equipment

Created on November 13, 2025 at 5:16 AM UTC