| Imperial | ||
|---|---|---|
| Capacities | Operating Weight | 6510 lb |
| Operating Capacity at 35% Tipping Load | 1350 lb | |
| Operating Capacity At 50% Tipping Load | 1929 lb | |
| Tipping capacity | 3858 lb | |
| Weight and dimensions | Overall Operating Height - Fully Raised | 144 in |
| Height to Hinge Pin - Fully Raised | 110 in | |
| Dump angle at full height | 40 ° | |
| Overall Height to top of ROPS | 76 in | |
| Overall length with bucket | 121 in | |
| Overall Length without Bucket | 93 in | |
| Specified Height | 59 in | |
| Reach at Specified Height | 30 in | |
| Dump angle at specified height | 75 ° | |
| Carry Position | 6 in | |
| Maximum Rollback Angle at Carry Position | 28 ° | |
| Digging Position | 0.71 in | |
| Angle of Departure with STD Counterweight | 28 ° | |
| Ground clearance | 8 in | |
| Track gauge | 45 in | |
| Track Shoe Width | 12 in | |
| Crawler base | 46 in | |
| Overall width less bucket | 57 in | |
| Bucket Width | 60 in | |
| Clearance Radius - Front with Bucket | 76 in | |
| Track Type / Track Rollers / Roller Type | Rubber / 4 / Steel | |
| Performances | Ground Speed - Single Speed | 6 mph |
| Drawbar Pull/Tractive Effort | 7161 lb | |
| Bucket Breakout - Tilt Cylinder | 3501 lb | |
| Bucket Breakout - Lift Cylinder | 3730 lb | |
| Engine | Engine brand | Yanmar |
| Engine model | 4TNV88 | |
| Motor Type | Radial Piston | |
| Engine power (Hp) | 46.60 Hp | |
| Engine power (kW) | 33.20 kW | |
| Battery voltage | 12 V | |
| Cold Cranking Amps at Temperature (CCA) | 800 A | |
| Alternator - Voltage / Ampere | 12 V / 100 A | |
| Hydraulics | Standard flow - Auxiliary hydraulics | 17 US gpm |
| Tank capacities | Oil Pan Capacity | 2 US gal |
| Hydraulic tank capacity | 9 US gal | |
| Fuel | 16 US gal | |
| Number of cylinders | 4 |
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.