| Metric | ||
|---|---|---|
| Capacities | Operating Weight | 2953 kg |
| Operating Capacity at 35% Tipping Load | 612.35 kg | |
| Operating Capacity At 50% Tipping Load | 875 kg | |
| Tipping capacity | 1750 kg | |
| Weight and dimensions | Overall Operating Height - Fully Raised | 3670 mm |
| Height to Hinge Pin - Fully Raised | 2794 mm | |
| Dump angle at full height | 40 ° | |
| Overall Height to top of ROPS | 1930 mm | |
| Overall length with bucket | 3076 mm | |
| Overall Length without Bucket | 2360 mm | |
| Specified Height | 1494 mm | |
| Reach at Specified Height | 771 mm | |
| Dump angle at specified height | 75 ° | |
| Carry Position | 165 mm | |
| Maximum Rollback Angle at Carry Position | 28 ° | |
| Digging Position | 18 mm | |
| Angle of Departure with STD Counterweight | 28 ° | |
| Ground clearance | 213 mm | |
| Track gauge | 1148 mm | |
| Track Shoe Width | 300 mm | |
| Crawler base | 1168 mm | |
| Overall width less bucket | 1448 mm | |
| Bucket Width | 1524 mm | |
| Clearance Radius - Front with Bucket | 1918 mm | |
| Track Type / Track Rollers / Roller Type | Rubber / 4 / Steel | |
| Performances | Ground Speed - Single Speed | 10 km/h |
| Drawbar Pull/Tractive Effort | 3248 kg | |
| Bucket Breakout - Tilt Cylinder | 1588 kg | |
| Bucket Breakout - Lift Cylinder | 1692 kg | |
| Engine | Engine brand | Yanmar |
| Engine model | 4TNV88 | |
| Motor Type | Radial Piston | |
| Engine power (Hp) | 46.60 Hp | |
| Engine power (kW) | 33.20 kW | |
| Battery voltage | 12 V | |
| Cold Cranking Amps at Temperature (CCA) | 800 A | |
| Alternator - Voltage / Ampere | 12 V / 100 A | |
| Hydraulics | Standard flow - Auxiliary hydraulics | 63.60 l/min |
| Tank capacities | Oil Pan Capacity | 6.40 l |
| Hydraulic tank capacity | 34.80 l | |
| Fuel | 59.40 l | |
| Number of cylinders | 4 |
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.