| Metric | Imperial | ||
|---|---|---|---|
| Capacities | Max. capacity | 2494.75 kg | 5500 lb |
| Max. lifting height | 5.82 m | 19 ft 1 in | |
| Maximum outreach | 3.40 m | 11 ft 2 in | |
| Breakout force with bucket | 3425.13 daN | ||
| Weight and dimensions | Length to face of forks | 3.89 m | 12 ft 9 in |
| Overall width | 1.81 m | 5 ft 11 in | |
| Overall height | 1.92 m | 6 ft 4 in | |
| Wheelbase | 2300 mm | 91 in | |
| Ground clearance | 330 mm | 13 in | |
| Overall cab width | 797 mm | 31 in | |
| Tilt-up angle | 12 ° | ||
| Tilt-down angle | 117 ° | ||
| External turning radius (over tyres) | 3.31 m | 10 ft 10 in | |
| Unladen weight (with forks) | 4720 kg | 10406 lb | |
| Tires type | Pneumatic | ||
| Forks length / width / section | 1200 mm x 125 mm x 45 mm | 47 in x 5 in x 2 in | |
| Performances | Lifting | 8 s | |
| Lowering | 5.40 s | ||
| Extension | 5.60 s | ||
| Retraction | 4.30 s | ||
| Crowd | 3.50 s | ||
| Dump | 3.60 s | ||
| Engine | Engine brand | Kubota | |
| Engine norm | Tier 4 final | ||
| Engine model | V3307-CR-TE5B | ||
| Number of cylinders / Capacity of cylinders | 4 - 3331 cm³ | 4 - 203 in³ | |
| Engine power (Hp/kW) | 74 Hp / 55.40 kW | ||
| Max. torque / Engine rotation | 1400 Nm @ 2600 rpm | 1033 ft/lbs @ 2600 rpm | |
| Drawbar pull | 3229.40 daN | ||
| Transmission | Transmission type | Hydrostatic | |
| Number of gears (forward / reverse) | 2 / 2 | ||
| Max. travel speed | 25 km/h | 16 mph | |
| Max. travel speed (may vary according to applicable regulations) | 25 km/h | 16 mph | |
| Parking brake | Hydraulic spring release SAHR | ||
| Service brake | Wet disc brakes | ||
| Hydraulics | Hydraulic pump type | Gear pump | |
| Hydraulic flow / Pressure | 88 l/min-235 bar | 23 US gpm-3408 PSI | |
| Tank capacities | Engine oil | 11.20 l | 3 US gal |
| Hydraulic oil | 115 l | 30 US gal | |
| Fuel | 63 l | 17 US gal | |
| Miscellaneous | Steering wheels (front / rear) | 2 / 2 | |
| Drive wheels (front / rear) | 2 / 2 | ||
| Controls | Joystick | ||
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.