MT 735 75D ST5

Technical sheet :

MT 735 75D ST5

MT 735 75D ST5
Manitou - handling your world
Capacities Metric Imperial
Max. capacity 3500 kg 7716 lb
Max. lifting height 6.90 m 22 ft 8 in
Maximum outreach 4 m 13 ft 1 in
Breakout force with bucket 6850 daN 6850 daN
Weight and dimensions
Overall length to carriage l11 4.70 m 15 ft 5 in
Length to face of forks l2 4.78 m 15 ft 8 in
Overall length (with forks) l1 5.98 m 19 ft 8 in
Overall width b1 2.27 m 7 ft 6 in
Overall height h17 2.48 m 8 ft 2 in
Wheelbase y 2.80 m 9 ft 2 in
Ground clearance m4 0.42 m 1 ft 5 in
Overall cab width b4 0.95 m 3 ft 1 in
Tilt-up angle a4 13 ° 13 °
Tilt-down angle a5 114 ° 114 °
External turning radius Wa3 3.78 m 12 ft 5 in
External turning radius (over tyres) Wa1 3.78 m 12 ft 5 in
Unladen weight (with forks) 6930 kg 15278 lb
Unladen weight 6610 kg 14573 lb
Overall weight 6930 kg 15278 lb
Tires type Inflatable Inflatable
Standard tires Alliance 400/80 - 24 -162A8 Alliance 400/80 - 24 -162A8
Forks length / width / section l / e / s 1200 mm x 100 mm x 50 mm 47 in x 4 in x 2 in
Performances
Lifting 5.90 s 5.90 s
Lowering 4.20 s 4.20 s
Extension 12.30 s 12.30 s
Retraction 4.70 s 4.70 s
Crowd 3.50 s 3.50 s
Dump 3.60 s 3.60 s
Engine
Engine brand Deutz Deutz
Engine norm Stage V / Tier 4 Final Stage V / Tier 4 Final
Engine model TCD 3.6 L TCD 3.6 L
Number of cylinders / Capacity of cylinders 4 - 2924 cm³ 4 - 178 in³
Engine power (Hp/kW) 75 Hp / 55.40 kW 75 Hp / 55.40 kW
Max. torque / Engine rotation 375 Nm @ 1400 rpm 277 ft/lbs @ 1400 rpm
Drawbar pull (Laden) 7220 daN 7220 daN
HVO validated (according to EN 15940 standard) Yes Yes
Electric circuit
12V Battery capacity 110 Ah 110 Ah
Transmission
Transmission type Torque converter Torque converter
Number of gears (forward / reverse) 4 / 4 4 / 4
Max. travel speed 24.70 km/h 15 mph
Max. travel speed (may vary according to applicable regulations) 24.70 km/h 15 mph
Parking brake Automatic parking brake Automatic parking brake
Service brake Hydraulic servo brake Hydraulic servo brake
Hydraulics
Hydraulic pump type Axial piston Axial piston
Hydraulic flow / Pressure 110 l/min-260 bar 29 US gpm-3771 PSI
Tank capacities
Engine oil 8.50 l 2 US gal
Hydraulic oil 129 l 34 US gal
Fuel 103 l 27 US gal
Noise and vibration
Noise at driving position (LpA) 77 dB 77 dB
Noise to environment (LwA) 104 dB 104 dB
Vibration on hands/arms 2.50 m/s² 8 ft/s²
Miscellaneous
Steering wheels (front / rear) 2 / 2 2 / 2
Drive wheels (front / rear) 2 / 2 2 / 2
Safety / Cab certification Standard EN 15000 / Cabin ROPS - FOPS level 2 Standard EN 15000 / Cabin ROPS - FOPS level 2
Controls JSM JSM

MT 735 75D ST5 - Dimensional drawing

MT 735 75D ST5
MT 735 75D ST5
MT 735 75D ST5

MT 735 75D ST5 - Load chart

Machine on tires with forks Metric MT 735 75D ST5
Machine on tires with forks Imperial MT 735 75D ST5
MT 735 75D ST5