MT 935 75D ST5

Technical sheet :

MT 935 75D ST5

MT 935 75D ST5
Manitou - handling your world
Capacities Metric Imperial
Max. capacity Q 3500 kg 7716 lb
Max. lifting height 9 m 29 ft 6 in
Max. outreach 6.40 m 21 ft
Breakout force with bucket 7180 daN 7180 daN
Weight and dimensions
Overall length to carriage l11 4.70 m 15 ft 5 in
Length to face of forks l2 4.78 m 15 ft 8 in
Overall length (with forks) l1 5.98 m 19 ft 7 in
Overall width b1 2.27 m 7 ft 6 in
Overall height h17 2.48 m 8 ft 2 in
Wheelbase y 2.80 m 9 ft 2 in
Ground clearance m4 0.42 m 1 ft 5 in
Overall cab width b4 0.95 m 3 ft 1 in
Tilt-up angle a4 13 ° 13 °
Tilt-down angle a5 114 ° 114 °
External turning radius Wa3 3.77 m 12 ft 4 in
External turning radius (over tyres) Wa1 3.78 m 12 ft 5 in
Unladen weight (with forks) 7480 kg 16491 lb
Overall weight 7480 kg 16491 lb
Tires type Inflatable Inflatable
Standard tires Alliance 400/80 - 24 - 162A8 Alliance 400/80 - 24 - 162A8
Forks length / width / section l / e / s 1200 mm x 100 mm x 50 mm 47 in x 4 in x 2 in
Performances
Lifting 7.20 s 7.20 s
Lowering 4.70 s 4.70 s
Extension 11 s 11 s
Retraction 7 s 7 s
Crowd 3 s 3 s
Dump 3.40 s 3.40 s
Engine
Engine brand Deutz Deutz
Engine norm Stage V / Tier 4 Final Stage V / Tier 4 Final
Engine model TCD 2.9l 2501-7118 TCD 2.9l 2501-7118
Number of cylinders / Capacity of cylinders 4 - 2924 cm³ 4 - 178 in³
Engine power (Hp/kW) 75 Hp / 55.40 kW 75 Hp / 55.40 kW
Max. torque / Engine rotation 375 Nm @ 1400 rpm 277 ft/lbs @ 1400 rpm
Drawbar pull (Laden) 7220 daN 7220 daN
HVO validated (according to EN 15940 standard) Yes Yes
Engine/Battery
12V Battery capacity 110 Ah 110 Ah
Transmission
Transmission type Torque converter Torque converter
Number of gears (forward / reverse) 4 / 4 4 / 4
Max. travel speed 24.70 km/h 15 mph
Max. travel speed (may vary according to applicable regulations) 24.90 km/h 15 mph
Parking brake Automatic parking brake Automatic parking brake
Service brake Hydraulic servo brake Hydraulic servo brake
Hydraulics
Hydraulic pump type Axial piston Axial piston
Hydraulic flow / Pressure 110 l/min-270 bar 29 US gpm-3916 PSI
Tank capacities
Engine oil 8.50 l 2 US gal
Hydraulic oil 145 l 38 US gal
Fuel tank capacity 103 l 27 US gal
Noise and vibration
Noise at driving position (LpA) 77 dB 77 dB
Noise to environment (LwA) 104 dB 104 dB
Vibration on hands/arms < 2.50 m/s² < 8 ft/s²
Miscellaneous
Steering wheels (front / rear) 2 / 2 2 / 2
Drive wheels (front / rear) 2 / 2 2 / 2
Safety / Cab certification Standard EN 15000 / Cabin ROPS - FOPS level 2 Standard EN 15000 / Cabin ROPS - FOPS level 2
Controls JSM JSM

MT 935 75D ST5 - Dimensional drawing

MT 935 75D ST5
MT 935 75D ST5
MT 935 75D ST5

MT 935 75D ST5 - Load chart

Machine on tires with forks Metric MT 935 75D ST5
MT 935 75D ST5