150 AETJ-C

Technical sheet :

150 AETJ-C

Oxygen by Manitou 150 AETJ-C
Manitou - handling your world
Capacities Metric Imperial
Working height h21 14.60 m 47 ft 11 in
Platform height h7 12.60 m 41 ft 4 in
Max. outreach 7.13 m 23 ft 5 in
Overhang 7.07 m 23 ft 2 in
Pendular arm rotation (top / bottom) +65 ° / -65 ° +65 ° / -65 °
Platform capacity Q 220 kg 485 lb
Turret rotation 355 ° 355 °
Platform rotation (right / left) 66 ° / 59 ° 66 ° / 59 °
Number of people (indoor / outdoor) 2 / 2 2 / 2
Weight and dimensions
Platform weight* 6975 kg 15377 lb
Platform dimensions (length x width) lp / ep 1.20 m x 0.92 m 3 ft 11 in x 3 ft
Floor height (access) h20 0.40 m 1 ft 4 in
Overall length l1 6.05 m 19 ft 10 in
Overall width b1 1.50 m 4 ft 11 in
Overall height h17 1.97 m 6 ft 6 in
Overall length (stowed) l9 4.40 m 14 ft 5 in
Overall height (stowed) h18 *** 2.08 m 6 ft 10 in
Jib length l13 1.26 m 4 ft 2 in
Counterweight offset (turret at 90°) a7 0.12 m 5 in
Internal turning radius / External turning radius Wa3 1.87 m/3.96 m 6 ft 2 in/13 ft
Ground clearance at centre of wheelbase m2 0.14 m 6 in
Wheelbase y 2 m 6 ft 7 in
Performances
Drive speed - stowed 5 km/h 3 mph
Drive speed - raised 0.60 km/h 0.37 mph
Gradeability 22 % 22 %
Permissible leveling 3 ° 3 °
Wheels
Tires type Non marking cushion Non marking cushion
Standard tires 24 x 7.5 in / 600 x 190 mm 24 x 7.5 in / 600 x 190 mm
Drive wheels (front / rear) 0 / 2 0 / 2
Steering wheels (front / rear) 2 / 0 2 / 0
Braking wheels (front / rear) 0 / 2 0 / 2
Engine/Battery
Drive motor power rating 2 x 3 kW 2 x 3 kW
Lift motor power 3.70 kW 3.70 kW
Battery nominal voltage / capacity 48 V / 240 Ah 48 V / 240 Ah
Battery energy 11 kWh 11 kWh
On-board charger (V / A) 48 V / 30 A 48 V / 30 A
Miscellaneous
Number of cycles with STD Battery (HIRD) 46 46
Ground Pressure 13.50 daN/cm2 196 PSI
Hydraulic Pressure 200 bar 2901 PSI
Hydraulic tank capacity 15 l 4 US gal
Noise to environment (LwA) < 70 dB < 70 dB
Vibration on hands/arms < 0.52 m/s² < 2 ft/s²
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019 European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019
*Varies according to options and standards of the country to which the machine is delivered

150 AETJ-C - Load chart

Load Chart metric 150 AETJ-C
Load Chart imperial 150 AETJ-C

150 AETJ-C - Dimensional drawing

150 AETJ-C
150 AETJ-C
150 AETJ-C

Equipment

Standard
Additional foot-operated horn
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
CAN bus technology
Easy Link with 2 year Service
Electrical pre-fitting - 230V
Emergency stop button in platform and on frame
Manual emergency lowering
Multi-function smartview display
Multi-voltage onboard charger - 48V - 35A - ZIVAN - Gel - Single-phase
Negative-type braking on rear wheels
Non-marking rubber tyres
Pendular arm
Platform with open-work floor
Proportional controls
Secondary Protection System (SPS)
Slinging and securing rings
Toolbox
Traction battery
Travel possible at maximum height
Optional
Audio warning on all motion
Audio warning on all motion
Basket controls protection
Biodegradable hydraulic oil - Grade 32
Central filling system
Charger plug - 110V - 16A - United Kingdom (G) type
Cold weather protection oil
Compressed air pipe pre-fitting
Easy Link - With access control keypad
Easy Link - With remote lock
Higher capacity battery, to start the machine easily in cold countries.
LED work light - On basket
Maintenance-free battery
Non-marking Foam Inflated Tires 683 x 236 mm / 27 x 10-12 in
Personalized paintwork
Rail protection
Safety kit - Helmet and harness
Turret orientation detection
Water pre-fitting
150 AETJ-C