160 ATJ+

Technical sheet :

160 ATJ+

160 ATJ+
Manitou - handling your world
Capacities Metric Imperial
Working height h21 16.21 m 53 ft 2 in
Platform height h7 14.21 m 46 ft 7 in
Max. outreach 8.52 m 27 ft 11 in
Overhang 7.39 m 24 ft 3 in
Pendular arm rotation (top / bottom) +66.50 ° / -65.80 ° +66.50 ° / -65.80 °
Platform capacity Q 408 kg 899 lb
Turret rotation 350 ° 350 °
Platform rotation (right / left) 90 ° / 90 ° 90 ° / 90 °
Number of people (indoor / outdoor) 3 / 3 3 / 3
Weight and dimensions
Platform weight* 7500 kg 16535 lb
Platform dimensions (length x width) lp / ep 2.30 m x 0.90 m 7 ft 7 in x 2 ft 11 in
Floor height (access) h20 0.38 m 1 ft 3 in
Overall length l1 7.09 m 23 ft 3 in
Overall width b1 2.38 m 7 ft 10 in
Overall height h17 2.47 m 8 ft 1 in
Overall length (stowed) l9 4.89 m 16 ft 1 in
Overall height (stowed) h18 *** 2.94 m 9 ft 8 in
Counterweight offset (turret at 90°) a7 0.19 m 7 in
External turning radius Wa3 4.03 m 13 ft 3 in
Ground clearance at centre of wheelbase m2 0.40 m 1 ft 4 in
Wheelbase y 2.20 m 7 ft 3 in
Performances
Drive speed - stowed 5 km/h 3 mph
Drive speed - raised 1 km/h 0.62 mph
Gradeability 45 % 45 %
Permissible leveling 5 ° 5 °
Wheels
Tires type Foam-filled Foam-filled
Standard tires 914 x 370 mm 914 x 370 mm
Drive wheels (front / rear) 2 / 2 2 / 2
Steering wheels (front / rear) 2 / 2 2 / 2
Braking wheels (front / rear) 0 / 2 0 / 2
Engine/Battery
Engine brand / model Kubota - D1105-E4B Kubota - D1105-E4B
Engine norm Stage IIIA, Stage V Stage IIIA, Stage V
Engine power (Hp / kW) 24.80 Hp / 18.50 kW 24.80 Hp / 18.50 kW
Miscellaneous
Ground Pressure 11.50 daN/cm2 167 PSI
Hydraulic Pressure 340 bar 4931 PSI
Hydraulic tank capacity 54.20 l 14 US gal
Fuel tank capacity 52 l 14 US gal
Noise to environment (LwA) < 105 dB < 105 dB
Vibration on hands/arms < 0.50 m/s² < 2 ft/s²
Daily consumption ** 4.51 l 1 US gal
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019 European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019
*Varies according to options and standards of the country to which the machine is delivered
** According to "REDUCE cycle"

160 ATJ+ - Load chart

Load Chart for MEWP Metric 160 ATJ+

160 ATJ+ - Dimensional drawing

160 ATJ+
160 ATJ+
160 ATJ+

Equipment

Standard
4 simultaneous movements
4 wheel drive
4 wheel steer with crab mode
Additional foot-operated horn
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Backup electrical pump
CAN bus technology
Differential locking on rear axle
Driver presence pedal
Easy Link with 2 year Service
Easy fast slinging system
Electrical pre-fitting - 230V
Front axle with limited slip
Fuel gauge with low level indicator
Hour meter
Integrated diagnostic assistance
Key lock on turret cover
LED rotating beacon
Large basket with three entries
Large color screen on turret
Leveling unlocking
Management via engine speed bearing
Oscillating front axle
Painted basket - For heavy loads - Width: 2300 mm (7 ft. 7 in.)
Secondary Protection System (SPS)
Stop & Go system
Optional
Additional storage boxes
Antitheft digicode
Biodegradable hydraulic oil - Grade 32
Diesel tank locking cap
Electric plug - 230V - In the basket - With differential circuit breaker - Europe (E/F) type
Engine pre-heater
Higher capacity battery, to start the machine easily in cold countries.
Hydraulic oil pre-heater
Key lock on turret cover
Large basket 2.30m with lateral door
Lower control box protection - With key lock on turret
Non-marking tIres
On-board generator (3,5 or 5 kW)
Painted narrow basket for heavy loads 1800mm (5 ft 11 in.)
Panel support kit
Personalized paintwork
Safety kit - Helmet and harness
Spark arrester muffler
Starter battery blanket
Tube support kit
Water pre-fitting
160 ATJ+