160 ATJ RC

Technical sheet :

160 ATJ RC

160 ATJ RC
Manitou - handling your world
Capacities Metric Imperial
Working height h21 16.02 m 52 ft 7 in
Platform height h7 14.02 m 46 ft
Max. outreach 8.30 m 27 ft 3 in
Overhang 7.40 m 24 ft 3 in
Pendular arm rotation (bottom) +59.50 ° +59.50 °
Platform capacity Q 230 kg 507 lb
Turret rotation 360 ° 360 °
Platform rotation (right / left) 90 ° / 90 ° 90 ° / 90 °
Number of people (indoor / outdoor) 2 / 2 2 / 2
Weight and dimensions
Platform weight* 6118 kg 13488 lb
Platform dimensions (length x width) lp / ep 1.80 m x 0.80 m 5 ft 11 in x 2 ft 7 in
Floor height (access) h20 0.40 m 1 ft 4 in
Overall length l1 6.68 m 21 ft 11 in
Overall width b1 2.38 m 7 ft 10 in
Overall height h17 2.37 m 7 ft 9 in
Overall length (stowed) l9 4.44 m 14 ft 7 in
Overall height (stowed) h18 *** 2.63 m 8 ft 8 in
Counterweight offset (turret at 90°) a7 0.19 m 7 in
External turning radius Wa3 3.63 m 11 ft 11 in
Ground clearance at centre of wheelbase m2 0.36 m 1 ft 2 in
Wheelbase y 2.20 m 7 ft 3 in
Performances
Drive speed - stowed 5 km/h 3 mph
Drive speed - raised 1 km/h 0.62 mph
Gradeability 45 % 45 %
Permissible leveling 5 ° 5 °
Wheels
Tires type Foam-filled Foam-filled
Drive wheels (front / rear) 2 / 2 2 / 2
Steering wheels (front / rear) 2 / 2 2 / 2
Braking wheels (front / rear) 0 / 2 0 / 2
Engine/Battery
Engine brand / model Kubota - D1105-E4B Kubota - D1105-E4B
Engine norm Interim Tier 4, Stage IIIA, Stage V Interim Tier 4, Stage IIIA, Stage V
Engine power (Hp / kW) 24.50 Hp / 18.50 kW 24.50 Hp / 18.50 kW
Miscellaneous
Ground Pressure 11.60 daN/cm2 168 PSI
Hydraulic Pressure 340 bar 4931 PSI
Hydraulic tank capacity 54.20 l 14 US gal
Fuel tank capacity 52 l 14 US gal
Noise to environment (LwA) < 105 dB < 105 dB
Daily consumption ** 4.51 l 1 US gal
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019 European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019
*Varies according to options and standards of the country to which the machine is delivered
** According to "REDUCE cycle"

160 ATJ RC - Load chart

Load Chart for MEWP Metric 160 ATJ RC

160 ATJ RC - Dimensional drawing

160 ATJ RC
160 ATJ RC
160 ATJ RC

Equipment

Standard
220V predisposition in the platform
4 simultaneous movements
4 wheel drive
4 wheel steer with crab mode
Additional foot-operated horn
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Backup electrical pump
Basket 1,800 mm
CAN bus technology
Continuous turret rotation
Differential locking on rear axle
Driver presence pedal
Easy Link with 2 year Service
Emergency stop button in platform and on frame
Front axle with limited slip
Fuel gauge with low level indicator
Fully galvanized basket with removable floor - Width: 2100 mm (6 ft. 11 in.)
Hour meter
Integrated diagnostic assistance
Key lock on turret cover
Leveling unlocking
Load sensing pump
Oscillating front axle
Secondary Protection System (SPS)
Simultaneous steering and turret rotation functions
Stop & Go system
Optional
Antitheft digicode
Battery charger
Battery cut-off
Biodegradable hydraulic oil - Grade 32
Cold weather protection oil
Diesel tank locking cap
Electric plug - 230V - In the basket - With differential circuit breaker - Europe (E/F) type
Engine pre-heater
Galvanized basket - Width: 1800 mm (5 ft. 11 in.) + Side swing gate
Galvanized basket - Width: 2100 mm (6 ft. 11 in.)
Galvanized basket - Width: 2100 mm (6 ft. 11 in.) + Side swing gate
Higher capacity battery, to start the machine easily in cold countries.
Non-marking tIres
On-board generator (3,5 or 5 kW)
Personalized paintwork
Safety kit - Helmet and harness
Spark arrester muffler
Tires - 910x370 mm (36x15 in.) - D610 - Foam filled
Water pre-fitting
160 ATJ RC