200 ATJ RC ST5

Technical sheet :

200 ATJ RC ST5

200 ATJ RC ST5
Manitou - handling your world
Capacities Metric Imperial
Working height h21 20.37 m 66 ft 10 in
Platform height h7 18.37 m 60 ft 3 in
Maximum outreach 11.99 m 39 ft 4 in
Overhang 7.97 m 26 ft 2 in
Pendular arm rotation (top / bottom) +69 ° / -66 ° +69 ° / -66 °
Platform capacity Q 230 kg 507 lb
Turret rotation 360 ° 360 °
Platform rotation (right / left) 90 ° / 90 ° 90 ° / 90 °
Number of people (indoor / outdoor) 2 / 2 2 / 2
Weight and dimensions
Platform weight* 10050 kg 22156 lb
Platform dimensions (length x width) lp / ep 2.10 m x 0.80 m 6 ft 11 in x 2 ft 7 in
Floor height (access) h20 500 mm 1 ft 8 in
Overall length l1 8.42 m 27 ft 7 in
Overall width b1 2.47 m 8 ft 1 in
Overall height h17 2.71 m 8 ft 11 in
Overall length (stowed) l9 6.08 m 19 ft 11 in
Overall height (stowed) h18 *** 3.12 m 10 ft 3 in
Counterweight offset (turret at 90°) a7 0.12 m 5 in
External turning radius Wa3 3.90 m 12 ft 10 in
Ground clearance at centre of wheelbase m2 0.44 m 1 ft 5 in
Wheelbase y 2.40 m 7 ft 10 in
Performances
Drive speed - stowed 4.70 km/h 3 mph
Drive speed - raised 0.80 km/h 0.50 mph
Gradeability 40 % 40 %
Permissible leveling 5 ° 5 °
Wheels
Tires type Cured-on solid tires Cured-on solid tires
Standard tires 1025 x 365 mm 1025 x 365 mm
Drive wheels (front / rear) 2 / 2 2 / 2
Steering wheels (front / rear) 2 / 2 2 / 2
Braking wheels (front / rear) 0 / 2 0 / 2
Engine/Battery
Engine brand / model Yanmar - 3TNV88C Yanmar - 3TNV88C
Engine norm Stage IIIA Stage IIIA
Engine power (Hp / kW) 34 Hp / 25.50 kW 34 Hp / 25.50 kW
Miscellaneous
Ground Pressure 20.65 dan/cm2 300 PSI
Hydraulic Pressure 335 bar 4859 PSI
Hydraulic tank capacity 80 l 21 US gal
Fuel 78 l 21 US gal
Standards compliance
This machine is in compliance with: European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019 European directives: 2006/42/EC- Machinery (revised EN280-1:2022) - 2004/108/EC (EMC) - EMC according to EN 12895 / 2015 +A1 / 2019
*Varies according to options and standards of the country to which the machine is delivered

200 ATJ RC ST5 - Load chart

Load Chart metric 200 ATJ RC ST5

200 ATJ RC ST5 - Dimensional drawing

200 ATJ RC ST5
200 ATJ RC ST5
200 ATJ RC ST5

Equipment

Standard
230V Predisposition
4 simultaneous movements
4 wheel drive
4 wheel steer with crab mode
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Backup electrical pump
CAN bus technology
Continuous turret rotation
Dead man pedal
Differential locking on rear axle
Easy Link with 2 year Service
Emergency stop button in platform and on frame
Engine compartment with key lock
Engine with DPF (Diesel Particulate Filter)
Front axle with limited slip
Fuel gauge with low level indicator
Galvanized basket 2,100 mm
Hour meter
Integrated diagnostic assistance
LED rotating beacon
Large color screen on turret
Management via engine speed bearing
Oscillating front axle
Proportional controls
Secondary Protection System (SPS)
Stop & Go system
Optional
110 or 230V plug with differential circuit breaker
Battery charger
Battery cut-off
Biodegradable hydraulic oil - Grade 32
Coded anti-start
Cold weather protection oil
Engine compartment with key lock
Fuel tank locking cap
Galvanized basket 2,100 mm
High capacity starting battery
Oil tank locking cap
On-board generator (3,5 or 5 kW)
Safety kit - Harness + helmet
Screen protection on the lower box control
Socket 230 V + differential circuit breaker
Water heater
200 ATJ RC ST5