| Metric | Imperial | ||
|---|---|---|---|
| Capacities | Operating Capacity At 50% Tipping Load | 1519.53 kg | 3350 lb |
| Rated Operating Capacity with Optional Counterweight | 1610.25 kg | 3550 lb | |
| Operating Weight | 4461 kg | 9835 lb | |
| Tipping capacity | 3040 kg | 6702 lb | |
| Weight and dimensions | Wheelbase | 1354 mm | 53 in |
| Overall Operating Height - Fully Raised | 4389 mm | 173 in | |
| Height to Hinge Pin - Fully Raised | 3409 mm | 134 in | |
| Overall Height to top of ROPS | 2084 mm | 82 in | |
| Dump angle at full height | 41 ° | ||
| Dump height | 2634 mm | 104 in | |
| Overall length with bucket | 3922 mm | 154 in | |
| Dump reach - Full height | 846 mm | 33 in | |
| Rollback Angle at Full Height | 94 ° | ||
| Seat to ground height | 1039 mm | 41 in | |
| Overall width less bucket | 1852 mm | 73 in | |
| Bucket Width | 1880 mm | 74 in | |
| Ground clearance | 209 mm | 8 in | |
| Overall length - Less Bucket | 3124 mm | 123 in | |
| Clearance Radius - Front with Bucket | 2299 mm | 91 in | |
| Performances | Travel speed (unladen) | 11.50 km/h | 7 mph |
| Travel Speed with Two-Speed Option - Maximum | 19.50 km/h | 12 mph | |
| Wheels | Standard tires | 12 x 16.5 | |
| Engine | Engine brand | Deutz | |
| Engine model | TCD3.6 | ||
| Max. torque / Engine rotation | 410 Nm / 1600 rpm | 302 ft/lbs / 1600 rpm | |
| Power source | Battery | ||
| Engine power (Hp / kW) | 99.80 Hp / 73.38 kW | ||
| Starter | 4 kW | ||
| Hydraulics | Standard flow - Auxiliary hydraulics | 94.60 l/min | 25 US gpm |
| Auxiliary Hydraulic Pressure | 237.86 bar | 3450 PSI | |
| High-Flow Auxiliary Hydraulics - Option | 151.40 l/min | 40 US gpm | |
| High-Flow Auxiliary Hydraulics Pressure - Option | 237.86 bar | 3450 PSI | |
| Tank capacities | Fuel | 106 l | 28 US gal |
| Hydraulic tank capacity | 27 l | 7 US gal | |
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.