| Metric | Imperial | ||
|---|---|---|---|
| Capacities | Static tipping load with bucket (straight) | 1015 kg | 2238 lb |
| Static tipping load with bucket (full turn) | 865 kg | 1907 lb | |
| Static tipping load with forks (straight) | 740 kg | 1631 lb | |
| Static tipping load with forks (full turn) | 630 kg | 1389 lb | |
| Max. height of bucket pivot point | 2736 mm | 108 in | |
| Weight and dimensions | Unladen weight (with forks) with 4-post canopy | 1740 kg | 3836 lb |
| Wheelbase | 1.41 m | 4 ft 8 in | |
| Overall cab width | 0.99 m | 3 ft 3 in | |
| Overall height with 4 posts canopy | 2.14 m | 7 ft | |
| Dump reach - Full height | 475 mm | 19 in | |
| Hood Height | 1.25 m | 4 ft 1 in | |
| Overall Operating Height - Fully Raised | 3.53 m | 11 ft 7 in | |
| Articulation angle | 45 ° | ||
| Maximum oscillation angle | 11 ° | ||
| Overall length with bucket | 3.62 m | 11 ft 11 in | |
| Overall width less bucket | 1.04 m | 3 ft 5 in | |
| Overall length - Less Bucket | 2.92 m | 9 ft 7 in | |
| Rear overhang | 0.80 m | 2 ft 8 in | |
| Dump angle - Fully raised | 41 ° | ||
| Dump Height - Fully Raised | 2 m | 6 ft 7 in | |
| Maximum Rollback Angle - Fully Raised | 45 ° | ||
| Digging Position | -45 mm | -2 in | |
| Ground clearance | 153 mm | 6 in | |
| Clearance Radius - Front with Bucket | 2.68 m | 8 ft 10 in | |
| Clearance Radius - Less bucket | 2.25 m | 7 ft 5 in | |
| Ground Plane to Bucket Edge Height | 2.51 m | 8 ft 3 in | |
| Tread width (wheel center) | 848 mm | 33 in | |
| Attachment Pivot Clearance | 192 mm | 8 in | |
| Height from ground to axle center | 144 mm | 6 in | |
| Bucket Width | 1.10 m | 3 ft 7 in | |
| Front Wheel Center to Pivot Pin | 563 mm | 22 in | |
| Height to Hinge Pin - Fully Raised | 2.73 m | 9 ft | |
| Engine | Engine brand | Perkins | |
| Engine model | 403J-11 | ||
| Engine norm | Stage V | ||
| Number of cylinders | 3 | ||
| Engine power (Hp / kW) | 24.70 Hp / 18.40 kW | ||
| Max. torque / Engine rotation | 66.80 Nm / 2100 rpm | 49 ft/lbs / 2100 rpm | |
| Engine cooling system | Water | ||
| Transmission | Transmission type | Hydrostatic with 4 wheel motors | |
| Number of gears (forward / reverse) | 1 / 1 | ||
| Max. travel speed (may vary according to applicable regulations) | 12 km/h | 7 mph | |
| Service brake | Inching Brake | ||
| Hydraulics | Hydraulic pump type | Gear pump | |
| Hydraulic flow - Pressure | 30 l/min / 207 bar | 8 US gpm / 3002 PSI | |
| Tank capacities | Hydraulic oil | 24 l | 6 US gal |
| Fuel | 30 l | 8 US gal | |
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.