AL650

Articulated loaders

Key Features

4-Post Canopy ROPS and FOPS certified
Proportional Auxiliary Hydraulics with Case Drain and Circuit Pressure Dump
Inching Pedal
Digital Display with Audible and Visual Indicators
Differential Lock (Hydraulically Activated Front and Rear)
Power-A-Tach® Attachment Mounting System (4-Point, Skid Steer and EuroStyle)
Lift Arm with Z-Bar Kinematics, Limited Self-Level and Mechanical Return to Dig
Lift Arm Float Detent
Hydraglide™ Ride Control*
High-Flow Auxiliary Hydraulics*

*Optional Features

Key Specifications

6,409 lbs (2907 kg) Static Tipping Load with Bucket Straight
65 hp (48.5 kW) gross power @ 1560 rpm
8' 1" (2.47 m) height to top of ROPS
10' 3" (3.13 m) maximum lifting height (below forks)
10' 10" (3.31 m) outer turning radius

gehl.com

AL650 Articulated loaders

		Metric	Imperial
Capacities	Static tipping load with bucket (straight)	3059 kg	6744 lb
	Static tipping load with bucket (full turn)	2230 kg	4916 lb
	Static tipping load with forks (straight)	2405 kg	5302 lb
	Max. height of bucket pivot point	3.32 m	10 ft 11 in
	Max. lifting height (below forks)	3.13 m	10 ft 3 in
	Breakout force with bucket	5743 daN
Weight and dimensions	Unladen weight (with forks) with 4-post canopy	4150 kg	9149 lb
	Wheelbase	2007 mm	79 in
	Overall width of 4 posts canopy	1.37 m	4 ft 6 in
	Overall cab width	1.37 m	4 ft 6 in
	Overall height with 4 posts canopy	2.47 m	8 ft 1 in
	Overall height with cab	2.47 m	8 ft 1 in
	Tilt-up angle	45 °
	Tilt-down angle	45 °
	Articulation angle	45 °
	Overall width less bucket	1.65 m	5 ft 5 in
	Overall length - Less Bucket	4.26 m	14 ft
	Ground clearance	0.37 m	1 ft 3 in
Engine	Engine brand	Yanmar
	Engine model	4TNV98CT
	Engine norm	Tier 4 final
	Number of cylinders / Capacity of cylinders	4 - 3300 cm³	4 - 201 in³
	Engine power (Hp / kW)	64.40 Hp / 48 kW
	Max. torque / Engine rotation	280 Nm / 2300 rpm	207 ft/lbs / 2300 rpm
	Engine cooling system	2 radiators water + hydraulic oil
Transmission	Transmission type	Hydrostatic
	Number of gears (forward / reverse)	2 / 2
	Max. travel speed (may vary according to applicable regulations)	30 km/h	19 mph
	Travel speed (laden)	30 km/h	19 mph
	Differential lock	Front and rear locking of the machine
	Parking brake	Manual
	Service brake	Hydraulic drum brake on front axle, acting on all 4 wheels
Hydraulics	Hydraulic pump type	Gear pump
	Hydraulic flow - Pressure	69.50 l/min / 200 bar	18 US gpm / 2901 PSI
	High-Flow Option (l/min)	97 l/min	26 US gpm
	Drive hydraulic system pressure	420 bar	6092 PSI
Tank capacities	Hydraulic oil	73.80 l	19 US gal
Tank capacities	Fuel	95 l	25 US gal
Noise and vibration	Vibration on hands/arms	2.50 m/s²	8 ft/s²
Miscellaneous	Cab certification	ROPS - FOPS cab (level 1)

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

Standard Features

Cup Holder
Reverse and Brake Tail Lights
Horn
Canopy
LED work lights - On the top of the boom (fixed part) (x2)
Side View Mirrors
Two-Speed Hydrostatic Drive System
Multi-Function Display Screen
Adjustable and telescopic steering column
Electronic Hand Throttle
Removable Rubber Floormat
Inching Pedal
Seven Way Adjustable Air Suspension Seat
Oscillating Front Frame
Lift Tilt Electronic Lockout Switch
Master electrical disconnect switch
Front and Rear - Work Lights
Tilt & Lift Arm Float Detent with Detent Disable

Optional Features

Speed control
LED Work Lights
Rotating Beacon
Canopy
Engine Block Heater
Cabin with Heat
Adaptive air suspension cloth-covered seat with heating and electric lumbar adjustment
12Volt Power Port
Electric Attachment control 14 Pin Harness with Switches
Cabin with Heat and Air Conditioning
Additional Set of Front Auxiliary Hydraulics
3-inch Seatbelt

One Gehl Way, West Bend, WI 53095
Phone: (262) 334-9461

Gehl Compact Equipment

Created on December 18, 2025 at 7:05 AM UTC