| Metric | Imperial | ||
|---|---|---|---|
| Capacities | Max. capacity | 1995.81 kg | 4400 lb |
| Max. lifting height | 4.34 m | 14 ft 3 in | |
| Maximum outreach | 2.74 m | 9 ft | |
| Breakout force with bucket | 1886 daN | ||
| Weight and dimensions | Overall length to carriage | 3.64 m | 11 ft 11 in |
| Length to face of forks | 3.58 m | 11 ft 9 in | |
| Overall width | 1.49 m | 4 ft 11 in | |
| Overall height | 1.91 m | 6 ft 3 in | |
| Wheelbase | 2.13 m | 7 ft | |
| Ground clearance | 0.24 m | 9 in | |
| Overall cab width | 0.80 m | 2 ft 7 in | |
| Tilt-up angle | 12 ° | ||
| Tilt-down angle | 116 ° | ||
| External turning radius (over tyres) | 3.07 m | 10 ft 1 in | |
| Unladen weight (with forks) | 4190 kg | 9237 lb | |
| Overall weight | 4189.83 kg | 9237 lb | |
| Tires type | Pneumatic | ||
| Engine | Engine brand | Kubota | |
| Engine norm | Stage V | ||
| Engine model | 2607-CR-E5 | ||
| Number of cylinders / Capacity of cylinders | 4 - 2615 cm³ | 4 - 160 in³ | |
| Engine power (Hp/kW) | 56.30 Hp / 42 kW | ||
| Max. torque / Engine rotation | 174 Nm @ 2700 rpm | 128 ft/lbs @ 2700 rpm | |
| Drawbar pull | 2850 daN | ||
| Drawbar pull (Laden) | 2850 daN | ||
| Transmission | Transmission type | Hydrostatic | |
| Number of gears (forward / reverse) | 2 / 2 | ||
| Max. travel speed | 25 km/h | 16 mph | |
| Max. travel speed (may vary according to applicable regulations) | 24.90 km/h | 15 mph | |
| Parking brake | Automatic Negative Hand-brake | ||
| Service brake | Disk brake on the cadran shaft | ||
| Axle Manufacturer | Dana | ||
| Hydraulics | Hydraulic pump type | Gear pump | |
| Hydraulic flow / Pressure | 77.41 l/min-235 bar | 20 US gpm-3408 PSI | |
| Tank capacities | Engine oil | 10.20 l | 3 US gal |
| Hydraulic oil | 68.14 l | 18 US gal | |
| Fuel | 60 l | 16 US gal | |
| Miscellaneous | Steering wheels (front / rear) | 2 / 2 | |
| Drive wheels (front / rear) | 2 / 2 | ||
| Safety / Cab certification | Standard EN 15000 / ROPS/FOPS | ||
| Controls | Single Joystick FNR | ||
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.