RT105

Compact Loaders

RT105

Key Features

  • IdealTrax™ - Automatic Track Tensioning System
  • All-Tach™ Attachment System (Universal-Type)
  • Audible Back-Up Alarm
  • Hydraloc™ System
  • ROPS/FOPS Level II
  • Controls: T-Bar Controls / Hand-Foot / Pilot Joysticks
  • Auxiliary Hydraulics
  • Entry / Exit Grab Handles

Key Specifications

  • Operating capacity (35%) - 1,050 lbs. (476 kg)
  • Overall height to top of ROPS - 71.5" (1816 mm)
  • Gross Power - 34.7 hp (25.5 kW) @ 2800 rpm
  • Yanmar / 3TNV88C-KMS / Tier IV
  • 80.7 ft.-lbs. (109.4 Nm) @ 1820 rpm max torque 
  • 109" (2769 mm) height to hinge pin
  • 50.8" (1290 mm) machine width - less bucket
  • 4,720 lbs. (2141 kg) operating weight
gehl.com
RT105 Compact Loaders
Metric Imperial
Capacities Operating Weight 2141 kg 4720 lb
Operating Capacity at 35% Tipping Load 476.27 kg 1050 lb
Operating Capacity At 50% Tipping Load 680.38 kg 1500 lb
Tipping capacity 1361 kg 3000 lb
Weight and dimensions Overall Operating Height - Fully Raised 3650 mm 144 in
Height to Hinge Pin - Fully Raised 2769 mm 109 in
Reach - Fully Raised 673.10 mm 26 in
Dump angle at full height 38 °
Dump Height - Fully Raised 2134 mm 84 in
Maximum Rollback Angle - Fully Raised 102 °
Overall Height to top of ROPS 1816 mm 71 in
Overall length with bucket 2985 mm 118 in
Overall Length without Bucket 2258 mm 89 in
Specified Height 1466 mm 58 in
Reach at Specified Height 991 mm 39 in
Dump angle at specified height 72 °
Carry Position 127 mm 5 in
Maximum Rollback Angle at Carry Position 32 °
Digging Position 0 mm 0 in
Ground clearance 191 mm 8 in
Track gauge 1039 mm 41 in
Track Shoe Width 250 mm 10 in
Crawler base 1283 mm 51 in
Overall width less bucket 1290 mm 51 in
Bucket Width 1372 mm 54 in
Clearance Radius - Front with Bucket 1854 mm 73 in
Track Type / Track Rollers / Roller Type Rubber / 3 / Steel
Performances Ground Speed - Single Speed 10.10 km/h 6 mph
Engine Engine brand Yanmar
Engine model 3TNV88C
Engine power (Hp) 34.20 Hp
Engine power (kW) 24.70 kW
Battery voltage 12 V
Cold Cranking Amps at Temperature (CCA) 800 A
Alternator - Voltage / Ampere 12 V / 55 A
Hydraulics Standard flow - Auxiliary hydraulics 55 l/min 15 US gpm
Tank capacities Hydraulic tank capacity 30 l 8 US gal
Fuel 36 l 10 US gal

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

RT105

Standard Features

  • Horn
  • High-Back Adjustable Seat
  • Dual-Element Air Cleaner with Indicator
  • All-Tach® Attachment Mounting System
  • 12Volt Power Port
  • Adjustable 2-inch Seat Belt
  • Hour meter
  • Operator Restraint Bar
  • Back-Up Alarm
  • Additional Set of Front Auxiliary Hydraulics
  • Sound reduction Package
  • Hydraloc™ Safety System
  • Hand/Foot Controls
  • Sliding Side Windows
  • Fuel gauge with low level indicator
  • Battery charge indicator lamp
  • T-Bar Controls
  • Front and Rear - Work Lights

Optional Features

  • Selectable Self-Leveling Hydraulic Lift Action
  • 4 point lift
  • Counterweight
  • Sliding Side Windows
  • Engine Block Heater
  • Inner rear view mirror
  • Air suspension seat
  • Pilot Joystick Controls
  • 3-inch Seatbelt
  • Strobe Light
  • Heat & Defrost
  • Swing-out Cab Door

One Gehl Way, West Bend, WI 53095
Phone: (262) 334-9461

Gehl Compact Equipment

© Manitou Americas, Inc. GEHL. All rights reserved. A Manitou Group Brand

Created on December 27, 2025 at 3:36 PM UTC