| Metric | Imperial | ||
|---|---|---|---|
| Capacities | Operating Weight | 3638 kg | 8020 lb |
| Operating Capacity at 35% Tipping Load | 748.42 kg | 1650 lb | |
| Operating Capacity At 50% Tipping Load | 1069 kg | 2357 lb | |
| Tipping capacity | 2139 kg | 4716 lb | |
| Weight and dimensions | Overall Operating Height - Fully Raised | 4008 mm | 158 in |
| Height to Hinge Pin - Fully Raised | 3038 mm | 120 in | |
| Reach - Fully Raised | 641 mm | 25 in | |
| Dump angle at full height | 39 ° | ||
| Dump Height - Fully Raised | 2329 mm | 92 in | |
| Maximum Rollback Angle - Fully Raised | 98 ° | ||
| Overall Height to top of ROPS | 1969 mm | 78 in | |
| Overall length with bucket | 3205 mm | 126 in | |
| Overall Length without Bucket | 2393 mm | 94 in | |
| Specified Height | 1638 mm | 64 in | |
| Reach at Specified Height | 559 mm | 22 in | |
| Dump angle at specified height | 70 ° | ||
| Carry Position | 198 mm | 8 in | |
| Maximum Rollback Angle at Carry Position | 28 ° | ||
| Digging Position | 53 mm | 2 in | |
| Ground clearance | 185 mm | 7 in | |
| Track gauge | 1428 mm | 56 in | |
| Track Shoe Width | 400 mm | 16 in | |
| Crawler base | 1265 mm | 50 in | |
| Overall width less bucket | 1753 mm | 69 in | |
| Bucket Width | 1778 mm | 70 in | |
| Clearance Radius - Front with Bucket | 1979 mm | 78 in | |
| Track Type / Track Rollers / Roller Type | Rubber / 4 / Steel | ||
| Performances | Ground Speed - Single Speed | 10.50 km/h | 7 mph |
| Drawbar Pull/Tractive Effort | 4345 kg | 9579 lb | |
| Bucket Breakout - Tilt Cylinder | 1919 kg | 4231 lb | |
| Bucket Breakout - Lift Cylinder | 2295 kg | 5060 lb | |
| Engine | Engine brand | Yanmar | |
| Engine model | 4TNV98C-NMS2 | ||
| Motor Type | Radial Piston | ||
| Engine power (Hp) | 69.30 Hp | ||
| Engine power (kW) | 51 kW | ||
| Battery voltage | 12 V | ||
| Cold Cranking Amps at Temperature (CCA) | 950 A | ||
| Alternator - Voltage / Ampere | 12 V / 100 A | ||
| Hydraulics | Standard flow - Auxiliary hydraulics | 71 l/min | 19 US gpm |
| High-Flow Auxiliary Hydraulics - Option | 113 l/min | 30 US gpm | |
| Tank capacities | Oil Pan Capacity | 9 l | 2 US gal |
| Hydraulic tank capacity | 39 l | 10 US gal | |
| Fuel | 62.50 l | 17 US gal | |
| Number of cylinders | 4 | ||
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.