| Imperial | ||
|---|---|---|
| Capacities | Operating Weight | 8020 lb |
| Operating Capacity at 35% Tipping Load | 1650 lb | |
| Operating Capacity At 50% Tipping Load | 2357 lb | |
| Tipping capacity | 4716 lb | |
| Weight and dimensions | Overall Operating Height - Fully Raised | 158 in |
| Height to Hinge Pin - Fully Raised | 120 in | |
| Reach - Fully Raised | 25 in | |
| Dump angle at full height | 39 ° | |
| Dump Height - Fully Raised | 92 in | |
| Maximum Rollback Angle - Fully Raised | 98 ° | |
| Overall Height to top of ROPS | 78 in | |
| Overall length with bucket | 126 in | |
| Overall Length without Bucket | 94 in | |
| Specified Height | 64 in | |
| Reach at Specified Height | 22 in | |
| Dump angle at specified height | 70 ° | |
| Carry Position | 8 in | |
| Maximum Rollback Angle at Carry Position | 28 ° | |
| Digging Position | 2 in | |
| Ground clearance | 7 in | |
| Track gauge | 56 in | |
| Track Shoe Width | 16 in | |
| Crawler base | 50 in | |
| Overall width less bucket | 69 in | |
| Bucket Width | 70 in | |
| Clearance Radius - Front with Bucket | 78 in | |
| Track Type / Track Rollers / Roller Type | Rubber / 4 / Steel | |
| Performances | Ground Speed - Single Speed | 7 mph |
| Drawbar Pull/Tractive Effort | 9579 lb | |
| Bucket Breakout - Tilt Cylinder | 4231 lb | |
| Bucket Breakout - Lift Cylinder | 5060 lb | |
| Engine | Engine brand | Yanmar |
| Engine model | 4TNV98C-NMS2 | |
| Motor Type | Radial Piston | |
| Engine power (Hp) | 69.30 Hp | |
| Engine power (kW) | 51 kW | |
| Battery voltage | 12 V | |
| Cold Cranking Amps at Temperature (CCA) | 950 A | |
| Alternator - Voltage / Ampere | 12 V / 100 A | |
| Hydraulics | Standard flow - Auxiliary hydraulics | 19 US gpm |
| High-Flow Auxiliary Hydraulics - Option | 30 US gpm | |
| Tank capacities | Oil Pan Capacity | 2 US gal |
| Hydraulic tank capacity | 10 US gal | |
| Fuel | 17 US gal | |
| Number of cylinders | 4 |
GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.