TX 408

Construction telehandlers

TX 408

Key Features

  • 4 Equal Wheels
  • 4-Wheel Steering
  • 3 Steering Modes
  • Torque Converter Transmission
  • Perkins 94hp Engine

Key Specifications

  • 7.6m Lifting Height
  • 4 Ton Capacity
  • 4.23m Reach
  • 38cm Ground Clearance
  • High Tilting Angle of 27°
TX 408 Construction telehandlers
Metric Imperial
Capacities Max. capacity 4000 kg 8818 lb
Max. lifting height 7.60 m 24 ft 11 in
Maximum outreach 4.23 m 13 ft 11 in
Weight and dimensions Overall length to carriage 4.67 m 15 ft 4 in
Length to face of forks 4.85 m 15 ft 11 in
Overall width 2.38 m 7 ft 10 in
Overall height 2.59 m 8 ft 6 in
Wheelbase 2.58 m 8 ft 6 in
Ground clearance 0.38 m 1 ft 3 in
Overall cab width 0.85 m 2 ft 9 in
Tilt-up angle 12 °
Tilt-down angle 114 °
External turning radius (over tyres) 3.90 m 12 ft 10 in
Unladen weight (with forks) 8260 kg 18210 lb
Overall weight 8140 kg 17946 lb
Tires type Inflatable
Standard tires BKT 16.0/70-20 14PR- EM936 SPL
Forks length / width / section 1200 mm x 125 mm x 45 mm 47 in x 5 in x 2 in
Performances Lifting 13 s
Lowering 9 s
Extension 9 s
Retraction 6.10 s
Crowd 4.30 s
Dump 3.20 s
Engine Engine brand Perkins
Engine norm Stage IIIA
Engine model 1104D-44T
Number of cylinders / Capacity of cylinders 4 - 4400 cm³ 4 - 269 in³
Engine power (Hp/kW) 94 Hp / 70 kW
Max. torque / Engine rotation 392 Nm @ 1400 rpm 289 ft/lbs @ 1400 rpm
Drawbar pull 7800 daN
Transmission Transmission type Torque converter
Number of gears (forward / reverse) 4 / 4
Max. travel speed 28 km/h 17 mph
Max. travel speed (may vary according to applicable regulations) 28 km/h 17 mph
Parking brake Oil-Immersed Multi-Disc Braking front and rear Axle
Service brake Hydraulic rear & front
Hydraulics Hydraulic pump type Gear pump
Hydraulic flow / Pressure 98 l/min-250 bar 26 US gpm-3626 PSI
Tank capacities Engine oil 11.50 l 3 US gal
Hydraulic oil 120 l 32 US gal
Fuel 78.50 l 21 US gal
Noise and vibration Noise at driving position (LpA) 92 dB
Noise to environment (LwA) 110 dB
Vibration on hands/arms 2.50 m/s² 8 ft/s²
Miscellaneous Steering wheels (front / rear) 2 / 2
Drive wheels (front / rear) 2 / 2
Safety / Cab certification Standard EN 15000 / Cabin ROPS - FOPS level 2
Controls Monolever

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

TX 408

Standard Features

  • ROPS/FOPS Level II Overheard Guard
  • Cyclonic air prefilter
  • Cab Enclosure
  • Battery cut-off

Optional Features

  • Work Lights - Front and Rear
  • Heating
  • Manual air conditioning
  • Aggravating_movements_cut_off_EN_15000
  • Attachment hydraulic line
  • Windscreen protection grid