VT320

Compact Loaders

VT320

Key Features

  • IdealTrax™ - Automatic Track Tensioning System
  • Low Effort Joystick Pilot Controls
  • Air Suspension Seat*
  • Cab Enclosure with Heat and Air Conditioning*
  • High Flow Auxiliary Hydraulics*
  • 2 Travel Speeds
  • Power-A-Tach® Quick Coupler*
  • Lift Arm Float Mode and Hydraglide ™ Ride Control

*Optional Equipment

Key Specifications

  • Operating Capacity (35%) - 3,200 lbs. (1452 kg)
  • Overall height to top of ROPS - 83.1" (2111 mm)
  • Gross Power 114 hp (85 kW) @ 2300 rpm
  • Deutz / TD 3.6 EPA / Tier IV
  • 339.3 ft.-lbs (460 Nm) @ 1600 rpm max torque
  • 9,901 lbs. (4492 kg) bucket breakout force
  • 130" (3302 mm) height to hinge pin
  • 11,800 lbs. (5352 kg) operating weight
gehl.com
VT320 Compact Loaders
Metric Imperial
Capacities Operating Weight 5352 kg 11799 lb
Operating Capacity at 35% Tipping Load 1452 kg 3201 lb
Operating Capacity At 50% Tipping Load 2074 kg 4572 lb
Tipping capacity 4148 kg 9145 lb
Weight and dimensions Overall Operating Height - Fully Raised 4298 mm 169 in
Height to Hinge Pin - Fully Raised 3302 mm 130 in
Reach - Fully Raised 1026 mm 40 in
Dump angle at full height 41 °
Dump Height - Fully Raised 2530 mm 100 in
Maximum Rollback Angle - Fully Raised 90.30 °
Overall Height to top of ROPS 2111 mm 83 in
Overall length with bucket 4059 mm 160 in
Overall Length without Bucket 3243 mm 128 in
Specified Height 1938 mm 76 in
Reach at Specified Height 751 mm 30 in
Carry Position 199 mm 8 in
Maximum Rollback Angle at Carry Position 31 °
Digging Position 19 mm 0.75 in
Angle of Departure with STD Counterweight 23.50 °
Ground clearance 309 mm 12 in
Track gauge 1313 mm 52 in
Track Shoe Width 450 mm 18 in
Crawler base 1570 mm 62 in
Overall width less bucket 1766 mm 70 in
Bucket Width 2131 mm 84 in
Clearance Radius - Front with Bucket 2489 mm 98 in
Track Type / Roller Type Rubber / Steel
Performances Ground Speed - Single Speed 8.60 km/h 5 mph
Drawbar Pull/Tractive Effort 5792 kg 12769 lb
Bucket Breakout - Tilt Cylinder 4492 kg 9903 lb
Bucket Breakout - Lift Cylinder 3398 kg 7491 lb
Engine Engine brand Deutz
Engine model TD 3.6 EPA
Motor Type Axial Piston with planetary gear box reduction
Engine power (Hp) 114 Hp
Engine power (kW) 85 kW
Battery voltage 12 V
Cold Cranking Amps at Temperature (CCA) 1600 A
Alternator - Voltage / Ampere 14 V / 120 A
Hydraulics Standard flow - Auxiliary hydraulics 110 l/min 29 US gpm
High-Flow Auxiliary Hydraulics - Option 142.71 l/min 38 US gpm
Tank capacities Hydraulic tank capacity 37.60 l 10 US gal
Fuel 121.10 l 32 US gal
Displacement / Number of cylinders 3.60 l / 4 0.95 US gal / 4

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

VT320

Standard Features

  • Lift Arm Support Device
  • Operator Restraint Bar
  • Horn
  • Auxiliary Hydraulics
  • Swing-Out Cooler
  • Anti-Vandalism Protection
  • Back-Up Alarm
  • Hour meter
  • High-Back Adjustable Seat
  • All-Tach® Attachment Mounting System
  • Hand/Foot Controls
  • ROPS/FOPS Level II Overhead Guard
  • Hydraloc™ Safety System

Optional Features

  • Suspension Seat - Mechanical
  • Two-Speed Drive
  • Power-A-Tach® Attachment Mounting System
  • Selectable Self-Leveling Hydraulic Lift Action
  • High-Flow Auxiliary Hydraulics
  • Pilot Joystick Controls
  • Counterweight
  • Foot and Hand Throttles (Dual Joystick and T-bar)
  • Hydraglide™ Ride Control
  • Back-Up Alarm
  • Air Conditioning
  • Engine Block Heater
  • Suspension Seat - Air Ride
  • Heating in cab
  • T-Bar Controls
  • Cab Enclosure

One Gehl Way, West Bend, WI 53095
Phone: (262) 334-9461

Gehl Compact Equipment

© Manitou Americas, Inc. GEHL. All rights reserved. A Manitou Group Brand

Created on December 15, 2025 at 6:17 PM UTC