VT320

Compact Loaders

VT320

Key Features

  • IdealTrax™ - Automatic Track Tensioning System
  • Low Effort Joystick Pilot Controls
  • Air Suspension Seat*
  • Cab Enclosure with Heat and Air Conditioning*
  • High Flow Auxiliary Hydraulics*
  • 2 Travel Speeds
  • Power-A-Tach® Quick Coupler*
  • Lift Arm Float Mode and Hydraglide ™ Ride Control

*Optional Equipment

Key Specifications

  • Operating Capacity (35%) - 3,200 lbs. (1452 kg)
  • Overall height to top of ROPS - 83.1" (2111 mm)
  • Gross Power 114 hp (85 kW) @ 2300 rpm
  • Deutz / TD 3.6 EPA / Tier IV
  • 339.3 ft.-lbs (460 Nm) @ 1600 rpm max torque
  • 9,901 lbs. (4492 kg) bucket breakout force
  • 130" (3302 mm) height to hinge pin
  • 11,800 lbs. (5352 kg) operating weight
gehl.com
VT320 Compact Loaders
Imperial
Capacities Operating Weight 11799 lb
Operating Capacity at 35% Tipping Load 3201 lb
Operating Capacity At 50% Tipping Load 4572 lb
Tipping capacity 9145 lb
Weight and dimensions Overall Operating Height - Fully Raised 169 in
Height to Hinge Pin - Fully Raised 130 in
Reach - Fully Raised 40 in
Dump angle at full height 41 °
Dump Height - Fully Raised 100 in
Maximum Rollback Angle - Fully Raised 90.30 °
Overall Height to top of ROPS 83 in
Overall length with bucket 160 in
Overall Length without Bucket 128 in
Specified Height 76 in
Reach at Specified Height 30 in
Carry Position 8 in
Maximum Rollback Angle at Carry Position 31 °
Digging Position 0.75 in
Angle of Departure with STD Counterweight 23.50 °
Ground clearance 12 in
Track gauge 52 in
Track Shoe Width 18 in
Crawler base 62 in
Overall width less bucket 70 in
Bucket Width 84 in
Clearance Radius - Front with Bucket 98 in
Track Type / Roller Type Rubber / Steel
Performances Ground Speed - Single Speed 5 mph
Drawbar Pull/Tractive Effort 12769 lb
Bucket Breakout - Tilt Cylinder 9903 lb
Bucket Breakout - Lift Cylinder 7491 lb
Engine Engine brand Deutz
Engine model TD 3.6 EPA
Motor Type Axial Piston with planetary gear box reduction
Engine power (Hp) 114 Hp
Engine power (kW) 85 kW
Battery voltage 12 V
Cold Cranking Amps at Temperature (CCA) 1600 A
Alternator - Voltage / Ampere 14 V / 120 A
Hydraulics Standard flow - Auxiliary hydraulics 29 US gpm
High-Flow Auxiliary Hydraulics - Option 38 US gpm
Tank capacities Hydraulic tank capacity 10 US gal
Fuel 32 US gal
Displacement / Number of cylinders 0.95 US gal / 4

GEHL Company reminds users to read and understand the operator’s manual before operating any equipment. Also, make sure all safety devices and shields are in place and functioning properly.
GEHL reserves the right to add improvements or make changes in specifications at any time without notice or obligation.

VT320

Standard Features

  • Auxiliary Hydraulics
  • Back-Up Alarm
  • Hand/Foot Controls
  • Lift Arm Support Device
  • Hour meter
  • Hydraloc™ Safety System
  • Anti-Vandalism Protection
  • All-Tach® Attachment Mounting System
  • Horn
  • ROPS/FOPS Level II Overhead Guard
  • Operator Restraint Bar
  • Swing-Out Cooler
  • High-Back Adjustable Seat

Optional Features

  • Air Conditioning
  • Back-Up Alarm
  • Cab Enclosure
  • Counterweight
  • Foot and Hand Throttles (Dual Joystick and T-bar)
  • Heating in cab
  • Hydraglide™ Ride Control
  • Pilot Joystick Controls
  • Power-A-Tach® Attachment Mounting System
  • Selectable Self-Leveling Hydraulic Lift Action
  • Suspension Seat - Air Ride
  • Suspension Seat - Mechanical
  • T-Bar Controls
  • Two-Speed Drive
  • High-Flow Auxiliary Hydraulics
  • Engine Block Heater

One Gehl Way, West Bend, WI 53095
Phone: (262) 334-9461

Gehl Compact Equipment

© Manitou Americas, Inc. GEHL. All rights reserved. A Manitou Group Brand

Created on May 10, 2026 at 11:35 AM UTC