| Capacities | Metric | Imperial | ||||
|---|---|---|---|---|---|---|
| Working height | h21 | 20.28 m | 66 ft 6 in | |||
| Platform height | h7 | 18.28 m | 60 ft | |||
| Maximum outreach | 12 m | 39 ft 4 in | ||||
| Overhang | 8 m | 26 ft 3 in | ||||
| Pendular arm rotation (top / bottom) | +69 ° / -66 ° | +69 ° / -66 ° | ||||
| Platform capacity | Q | 230 kg | 507 lb | |||
| Turret rotation | 355 ° | 355 ° | ||||
| Platform rotation (right / left) | 90 ° / 90 ° | 90 ° / 90 ° | ||||
| Number of people (indoor / outdoor) | 2 / 2 | 2 / 2 |
| Weight and dimensions | ||||||
|---|---|---|---|---|---|---|
| Platform weight* | 10050 kg | 22156 lb | ||||
| Platform dimensions (length x width) | lp / ep | 2.10 m x 0.80 m | 6 ft 11 in x 2 ft 7 in | |||
| Floor height (access) | h20 | 0.51 m | 1 ft 8 in | |||
| Overall length | l1 | 8.42 m | 27 ft 7 in | |||
| Overall width | b1 | 2.40 m | 7 ft 10 in | |||
| Overall height | h17 | 2.71 m | 8 ft 11 in | |||
| Overall length (stowed) | l9 | 6.21 m | 20 ft 4 in | |||
| Overall height (stowed) | h18 *** | 2.85 m | 9 ft 4 in | |||
| Counterweight offset (turret at 90°) | a7 | 0.11 m | 4 in | |||
| Counterweight Oversize / Reach | 0.11 m | 4 in | ||||
| External turning radius | Wa3 | 4.17 m | 13 ft 8 in | |||
| Ground clearance at centre of wheelbase | m2 | 0.44 m | 1 ft 5 in | |||
| Wheelbase | y | 2.40 m | 7 ft 10 in |
| Performances | ||||||
|---|---|---|---|---|---|---|
| Drive speed - stowed | 4.70 km/h | 3 mph | ||||
| Drive speed - raised | 0.80 km/h | 0.50 mph | ||||
| Gradeability | 40 % | 40 % | ||||
| Permissible leveling | 5 ° | 5 ° |
| Wheels | ||||||
|---|---|---|---|---|---|---|
| Tires type | Solid tires | Solid tires | ||||
| Standard tires | 1025 x 365 mm | 1025 x 365 mm | ||||
| Drive wheels (front / rear) | 2 / 2 | 2 / 2 | ||||
| Steering wheels (front / rear) | 2 / 2 | 2 / 2 | ||||
| Braking wheels (front / rear) | 0 / 2 | 0 / 2 |
| Engine/Battery | ||||||
|---|---|---|---|---|---|---|
| Engine brand / model | Kubota - V2403-M | Kubota - V2403-M | ||||
| Engine norm | Stage IIIA | Stage IIIA | ||||
| Engine power (Hp / kW) | 46 Hp / 34.10 kW | 46 Hp / 34.10 kW |
| Miscellaneous | ||||||
|---|---|---|---|---|---|---|
| Ground Pressure | 20.65 dan/cm2 | 300 PSI | ||||
| Hydraulic Pressure | 335 bar | 4859 PSI | ||||
| Hydraulic tank capacity | 80 l | 21 US gal | ||||
| Fuel | 78 l | 21 US gal | ||||
| Vibration on hands/arms | 0.50 m/s² | 2 ft/s² | ||||
| Daily consumption ** | 7.96 l | 2 US gal |
| Standards compliance | ||||||
|---|---|---|---|---|---|---|
| This machine is in compliance with: | European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) | European directives: 2006/42/EC- Machinery (revised EN280:2013) - 2004/108/EC (EMC) |
*Varies according to options and standards of the country to which the machine is delivered
** According to "REDUCE cycle"
200 ATJ-X - Load chart
Load Chart metric
200 ATJ-X - Dimensional drawing
Equipment
| Standard |
|---|
| 230V Predisposition |
| 4 simultaneous movements |
| 4 wheel drive |
| 4 wheel steer with crab mode |
| Audible alarm and illuminated indicator lamp (leveling, overload, lowering) |
| Backup electrical pump |
| CAN bus technology |
| Dead man pedal |
| Differential locking on rear axle |
| Fuel gauge with low level indicator |
| Galvanized basket 2,100 mm |
| Hour meter |
| Management via engine speed bearing |
| Oscillating front axle |
| Proportional controls |
| Optional |
|---|
| 110 or 230V plug with differential circuit breaker |
| Battery cut-off |
| Biodegradable oil |
| Catalytic cleaner |
| Coded anti-start |
| Cold weather protection oil |
| Continuous turret rotation |
| Engine compartment with key lock |
| High capacity starting battery |
| Key lock on fuel tank |
| On-board generator (3,5 or 5 kW) |
| SMS : Safe Man System |
| Safety harness |
| Screen protection on the lower box control |
| Spark arrester |
| Water heater |
| Working light |
