| Capacities | Metric | Imperial | ||||
|---|---|---|---|---|---|---|
| Max. capacity | Q | 1500 kg | 3307 lb | |||
| Max. lifting height | h3 | 4.30 m | 14 ft 1 in | |||
| Maximum outreach | 2.62 m | 8 ft 7 in | ||||
| Reach at max. height | 1 m | 3 ft 3 in | ||||
| Breakout force with bucket | 1880 daN | 1880 daN |
| Weight and dimensions | ||||||
|---|---|---|---|---|---|---|
| Shipping mass (min. / max.) | 2700 kg / 2900 kg | 5952 lb / 6393 lb | ||||
| Ground clearance | m4 | 0.29 m | 11 in | |||
| Wheelbase | y | 2.13 m | 7 ft | |||
| Overall length to carriage (with hitch) | l11 | 3.47 m | 11 ft 5 in | |||
| Overall length to carriage (without hitch) | l3 | 3.47 m | 11 ft 5 in | |||
| Front overhang | 0.77 m | 2 ft 6 in | ||||
| Overall width | b1 | 1.49 m | 4 ft 11 in | |||
| Overall cab width | b4 | 0.66 m | 2 ft 2 in | |||
| Overall height | h17 | 1.92 m | 6 ft 4 in | |||
| Tilt-down angle | a5 | 116 ° | 116 ° | |||
| Tilt-up angle | a4 | 23 ° | 23 ° | |||
| External turning radius (over tyres) | Wa1 | 2.62 m | 8 ft 7 in | |||
| Standard tires | CAMSO - MPT 552 - 10.0/75-15.3 124A8 | CAMSO - MPT 552 - 10.0/75-15.3 124A8 |
| Performances | ||||||
|---|---|---|---|---|---|---|
| Lifting | 8.80 s | 8.80 s | ||||
| Lowering | 7 s | 7 s | ||||
| Extension | 6.40 s | 6.40 s | ||||
| Retraction | 4.30 s | 4.30 s | ||||
| Crowd | 3.40 s | 3.40 s | ||||
| Dump | 2.60 s | 2.60 s |
| Engine | ||||||
|---|---|---|---|---|---|---|
| Engine brand | Yanmar | Yanmar | ||||
| Engine norm | Stage V, Tier 4 final | Stage V, Tier 4 final | ||||
| Engine model | 3TNV88C-DMU | 3TNV88C-DMU | ||||
| Number of cylinders - Capacity of cylinders | 3 - 1642 cm³ | 3 - 100 in³ | ||||
| Engine power (Hp / kW) | 35.10 Hp / 26.20 kW | 35.10 Hp / 26.20 kW | ||||
| Max. torque / Engine rotation | 105 Nm @1950 rpm | 77 ft/lbs @1950 rpm | ||||
| Drawbar pull (Laden) | 2000 daN | 2000 daN | ||||
| Reversible fan | Option | Option | ||||
| Engine cooling system | 3 radiators (water + hydraulic oil + fuel) | 3 radiators (water + hydraulic oil + fuel) | ||||
| HVO validated (according to EN 15940 standard) | Yes | Yes |
| Transmission | ||||||
|---|---|---|---|---|---|---|
| Transmission type | Hydrostatic | Hydrostatic | ||||
| Number of gears (forward / reverse) | 2 / 2 | 2 / 2 | ||||
| Max. travel speed (may vary according to applicable regulations) | 25 km/h | 16 mph | ||||
| Differential lock | Limited slip differential on front and rear axles | Limited slip differential on front and rear axles | ||||
| Parking brake | Automatic negative parking brake | Automatic negative parking brake | ||||
| Service brake | Hydraulic servo brake | Hydraulic servo brake |
| Hydraulics | ||||||
|---|---|---|---|---|---|---|
| Hydraulic pump type | Gear pump | Gear pump | ||||
| Hydraulic flow - Pressure | 48 l/min - 235 bar | 13 US gpm - 3408 PSI | ||||
| Flow sharing distributor | Standard | Standard |
| Tank capacities | ||||||
|---|---|---|---|---|---|---|
| Hydraulic tank capacity | 39 l | 10 US gal | ||||
| Fuel | 35 l | 9 US gal |
| Noise and vibration | ||||||
|---|---|---|---|---|---|---|
| Noise at driving position (LpA) tested following NF EN 12053 norm | 76 dB | 76 dB | ||||
| Noise to environment (LwA) | 104 dB | 104 dB | ||||
| Vibration on hands/arms | 2.50 m/s² | 8 ft/s² |
| Miscellaneous | ||||||
|---|---|---|---|---|---|---|
| Cab certification | ROPS - FOPS cab (level 1) | ROPS - FOPS cab (level 1) | ||||
| Controls | JSM | JSM |
ULM 415 H - Dimensional drawing
ULM 415 H - Load chart
Machine on tires with forks Metric
Machine on tires with forks Imperial
Machine on tires with forks LC 600 mm Metric
Machine on tires with forks LC 600 mm (Imperial)
